WELL WAKE UP! For Asphaltene Remedy
G-CLEAN Well Wake UP! for Asphaltenes is a well stimulation solution specifically engineered to break down the asphaltenes and remove the build up from the well while increasing production 50-100%, even more in some documented cases.
GETG has developed a safe and clean way to address the issue of asphaltene buildup and blockages without the use of superheated steam or dangerous acids that may contaminate oil. Unlike toluene and other benzenes, the product is not a solvent and will never mix with or degrade the oil. After treatment, the oil is not compromised and is fully compatible with production facilities as well as refining processes.
DIRECTIONS FOR USE
The amount of product necessary will vary depending on the depth of the well, the size of the bore, specific down-hole conditions and the type of crude as well as the substantiation of specific formation restrictions. Once a diagnosis is made, then the process involves either diluting the product with water on site (fresh or salt) prior to pumping, or pumping the fluid undiluted down the well (diluting A & B at the same dilution rate and pumping down separately one after the other beginning with A), recirculating the well and then allowing 12- 24 hours of ‘soaking’ or dwell time under pressure. Upon completion of treatment, the oils and the contaminants will be pumped out with the initial flow (into a Baker or holding tank) and can the be easily separated for disposal.
Well Wake UP! Is part of a two part application that works best as part of a comprehensive service plan. When production is halted for service work, a treatment ensures that bore restriction ceases to be an issue. Mix Part A with Part B on site and apply to well as per instructions.